Hover to zoom

Peltier TEC1-12706 12706 Thermoelectric Cooler Module 12V for DIY Refrigeration

4.00 out of 5 based on 1 customer rating
(1 customer review)

225.00 (Incl. GST)


FREE Delivery on prepaid orders over Rs.249 In Stock

A thermoelectric cooling (TEC) module is a semiconductor-based electronic component that functions as a small heat pump. By applying DC power source to a TEC, heat will be transferred from one side of the module to the other. It creates a cold and hot side. They are widely used in industrial areas, for example, computer CPU, CCDs, portable refrigerators, medical instruments, and so on.

In stock

SKU: TEC01 Category: Tag:

A thermoelectric cooling (TEC) module is a semiconductor-based electronic component that functions as a small heat pump. By applying DC power source to a TEC, heat will be transferred from one side of the module to the other. It creates a cold and hot side. They are widely used in industrial areas, for example, computer CPU, CCDs, portable refrigerators, medical instruments, and so on.

Please Note:

  1. The hot surface of the TEC must be attached to a suitable FAN SINK (60x60x40+mm) that is capable of carrying away both the heat pumped by the TEC plus Joule heat from the electric power supplied to the TEC. A heat sink rise of 15C above ambient is typical for many TEC applications. Otherwise, a bigger heat sink must be used to reduce temperature.
  2. Care should be taken when applying pressure during installation. Uniform pressure is desired across the mounting surfaces. If uneven pressure is applied, thermal performance may be reduced or damage may occur to the TEC.
  3. Clean surface thoroughly, making sure there are no chips, dirt or any foreign substances that may affect bonding. Coat the contacting sides, Th and Tc, with thermally conductive grease or glue.
  4. Power ON the device only with proper Heat-sink setup to avoid any burning/damage or malfunction of the device.
  5. Use a good quality heat sink (such as in CPU fans) with thermal paste and power the device.
  6. Use a 12V Dc Power supply to power the TEC1-12706.
  7. Use ONE AA battery for 10- 20 seconds to power ON the device to find the hot /cold side.

Warning!

Power Switch ON the device only with proper Heat-sink setup covering the full hot surface of the Peltier to avoid burning/damage/malfunction of device!

1 review for Peltier TEC1-12706 12706 Thermoelectric Cooler Module 12V for DIY Refrigeration

  1. Rated 4 out of 5

    varasaniparth2014 (verified owner)

    Packaging is good and item also as discription but shipping time is too delayed. You have to do something for better shipment.overall good.

Only logged in customers who have purchased this product may leave a review.
Nobody likes SPAM!

Positive SSL